|
|
||||||
|
Continuous producing line of electro galvanizing for
24wires |
||||||
|
A. Technique requirements |
||||||
|
⒈ DV value：40mm*m/min ⒉ Specification：Φ1.5～2.6mm ⒊ Carbon content of steel wire ：0.65～0.85％C ⒋ Quantity of processed steel wire：24 ⒌ Space between two steel wire：30mm ⒍ Height of the steel wire：900mm (Electro part 800mm) ⒎ Check and control the concentration: manual check/manual
supply ⒏ Check and control the temperature: digital display/automatic
control ⒐ Check and control the liquid level: high low alarm/
manual supply (except electroplating bath) ⒑ Mode of processing steel wire: electro galvanizing (coating
weight 60~120g/m2) |
||||||
|
Specification mm |
Coating weight g/㎡ |
Electric current of single wire A/one
wire |
Electric current density A/㎡ |
Quantity |
Processing speed m/min |
Output（t/year） According to 7200 hours |
|
Φ1.8 |
60～120 |
520 |
29 |
24 |
22.5 |
3750 |
|
Φ2.0 |
80 |
520 |
29 |
24 |
20 |
4150 |
|
Φ2.2 |
80 |
520 |
29 |
24 |
18.5 |
4650 |
|
⒒ Power supply for processing steel wire:380V±20（50Hz） ⒓ Steam for processing steel wire:0.4±0.1Mpa ⒔ Machine utilization: rope making of normal high quality
carbon steel and production of finished steel wire ⒕ Technological process: pay off ~steel wire distributing
device ~tensioning device ~sealed intermediate temperature hydrochloric acid
pickling~ water rinsing three times ~electro galvanizing ~ water rinsing
three times ~hot water rinsing ~drying ~ steel wire distributing device
~take-up machine |
||||||
|
|
||||||
