- General Details
- Send Inquiry
- Related Products
Application: for cable armoring.
Finish: The surface of Galvanized steel tapes is free form scales, seams, Zinc flakes and other surface imperfection. The zinc coating smooth and continuous.
Thickness: 0.15 mm to 2.00 mm
Width: 4 mm to 1250 mm
Tensile Strength: 28 to 50 kgf/mm2
Elongation: Minimum 10% on 250 mm gauge length.
Zinc Coating: Minimum 110 g/m2 (total weight on all four sides). However, this can be increased to suit customer’s requirements.
|0.10 to 2.00||0.30 to 2.00||0.12 to 1.20||0.30 to 2.00|
|Up to 1250||Up to 1250||660, 762, 800, 900, 1050||Up to 1250|
|Up to 4500||Up to 4500||Up to 4100 ( 16″)||Up to 4500|
|Surface Finish||Regular And minimum Spangles||Mate with Zero/minimum Spangles||Regular Spangles||Matte|
|80 to 300||80 to 300||80 to 300||80 to 300|
|Grades||Soft/Lock Forming||EDD, DD & D
(SPCEN, SPCD, SPCC)
Packing: Galvanized steel coils are wrapped in strong water proof sea-worthy packing and are in palletized loads.
Other types of packing can be done as required, such as: the coil core with the cardboard tube inside.
Delivery Form: Galvanized Steel Tapes are supplied in continuous lengths in ribbon wound coils.
Coil Size: Inside Diameter- minimum 150 mm, Outside Diameter – Within 400-800.
Testing: Galvanized Steel Tapes are manufactured according to customer’s requirements and specifications.
Our products conform to the following standards:
- ASTM A90 BS 2989
- ASTM A93 IS 3975
- ASTM A459